A .config/niri/config.kdl

@@ -0,0 +1,597 @@ 
+// This config is in the KDL format: https://kdl.dev
+// "/-" comments out the following node.
+
+input {
+    keyboard {
+        xkb {
+            // You can set rules, model, layout, variant and options.
+            // For more information, see xkeyboard-config(7).
+
+            // For example:
+            // layout "us,ru"
+            // options "grp:win_space_toggle,compose:ralt,ctrl:nocaps"
+        }
+
+        // You can set the keyboard repeat parameters. The defaults match wlroots and sway.
+        // Delay is in milliseconds before the repeat starts. Rate is in characters per second.
+        // repeat-delay 600
+        // repeat-rate 25
+
+        // Niri can remember the keyboard layout globally (the default) or per-window.
+        // - "global" - layout change is global for all windows.
+        // - "window" - layout is tracked for each window individually.
+        // track-layout "global"
+    }
+
+    // Next sections include libinput settings.
+    // Omitting settings disables them, or leaves them at their default values.
+    touchpad {
+        tap
+        // dwt
+        // dwtp
+        // natural-scroll
+        // accel-speed 0.2
+        // accel-profile "flat"
+        // tap-button-map "left-middle-right"
+    }
+
+    mouse {
+        // natural-scroll
+        // accel-speed 0.2
+        // accel-profile "flat"
+    }
+
+    trackpoint {
+        // natural-scroll
+        // accel-speed 0.2
+        // accel-profile "flat"
+    }
+
+    tablet {
+        // Set the name of the output (see below) which the tablet will map to.
+        // If this is unset or the output doesn't exist, the tablet maps to one of the
+        // existing outputs.
+        map-to-output "eDP-1"
+    }
+
+    touch {
+        // Set the name of the output (see below) which touch input will map to.
+        // If this is unset or the output doesn't exist, touch input maps to one of the
+        // existing outputs.
+        map-to-output "eDP-1"
+    }
+
+    // By default, niri will take over the power button to make it sleep
+    // instead of power off.
+    // Uncomment this if you would like to configure the power button elsewhere
+    // (i.e. logind.conf).
+    // disable-power-key-handling
+}
+
+// You can configure outputs by their name, which you can find
+// by running `niri msg outputs` while inside a niri instance.
+// The built-in laptop monitor is usually called "eDP-1".
+// Remember to uncomment the node by removing "/-"!
+output "eDP-1" {
+    // Uncomment this line to disable this output.
+    // off
+
+    // Scale is a floating-point number, but at the moment only integer values work.
+    scale 2.0
+
+    // Transform allows to rotate the output counter-clockwise, valid values are:
+    // normal, 90, 180, 270, flipped, flipped-90, flipped-180 and flipped-270.
+    transform "normal"
+
+    // Resolution and, optionally, refresh rate of the output.
+    // The format is "<width>x<height>" or "<width>x<height>@<refresh rate>".
+    // If the refresh rate is omitted, niri will pick the highest refresh rate
+    // for the resolution.
+    // If the mode is omitted altogether or is invalid, niri will pick one automatically.
+    // Run `niri msg outputs` while inside a niri instance to list all outputs and their modes.
+    mode "1920x1080"
+
+    // Position of the output in the global coordinate space.
+    // This affects directional monitor actions like "focus-monitor-left", and cursor movement.
+    // The cursor can only move between directly adjacent outputs.
+    // Output scale has to be taken into account for positioning:
+    // outputs are sized in logical, or scaled, pixels.
+    // For example, a 3840×2160 output with scale 2.0 will have a logical size of 1920×1080,
+    // so to put another output directly adjacent to it on the right, set its x to 1920.
+    // It the position is unset or results in an overlap, the output is instead placed
+    // automatically.
+    position x=1280 y=0
+}
+
+layout {
+    // By default focus ring and border are rendered as a solid background rectangle
+    // behind windows. That is, they will show up through semitransparent windows.
+    // This is because windows using client-side decorations can have an arbitrary shape.
+    //
+    // If you don't like that, you should uncomment `prefer-no-csd` below.
+    // Niri will draw focus ring and border *around* windows that agree to omit their
+    // client-side decorations.
+
+    // You can change how the focus ring looks.
+    focus-ring {
+        // Uncomment this line to disable the focus ring.
+        // off
+
+        // How many logical pixels the ring extends out from the windows.
+        width 3
+
+        // Colors can be set in a variety of ways:
+        // - CSS named colors: "red"
+        // - RGB hex: "#rgb", "#rgba", "#rrggbb", "#rrggbbaa"
+        // - CSS-like notation: "rgb(255, 127, 0)", rgba(), hsl() and a few others.
+
+        // Color of the ring on the active monitor.
+        active-color "#7fc8ff"
+
+        // Color of the ring on inactive monitors.
+        inactive-color "#505050"
+
+        // Additionally, there's a legacy RGBA syntax:
+        // active-color 127 200 255 255
+
+        // You can also use gradients. They take precedence over solid colors.
+        // Gradients are rendered the same as CSS linear-gradient(angle, from, to).
+        // The angle is the same as in linear-gradient, and is optional,
+        // defaulting to 180 (top-to-bottom gradient).
+        // You can use any CSS linear-gradient tool on the web to set these up.
+        //
+        // active-gradient from="#80c8ff" to="#bbddff" angle=45
+
+        // You can also color the gradient relative to the entire view
+        // of the workspace, rather than relative to just the window itself.
+        // To do that, set relative-to="workspace-view".
+        //
+        // inactive-gradient from="#505050" to="#808080" angle=45 relative-to="workspace-view"
+    }
+
+    // You can also add a border. It's similar to the focus ring, but always visible.
+    border {
+        // The settings are the same as for the focus ring.
+        // If you enable the border, you probably want to disable the focus ring.
+        off
+
+        width 4
+        active-color "#ffc87f"
+        inactive-color "#505050"
+
+        // active-gradient from="#ffbb66" to="#ffc880" angle=45 relative-to="workspace-view"
+        // inactive-gradient from="#505050" to="#808080" angle=45 relative-to="workspace-view"
+    }
+
+    // You can customize the widths that "switch-preset-column-width" (Mod+R) toggles between.
+    preset-column-widths {
+        // Proportion sets the width as a fraction of the output width, taking gaps into account.
+        // For example, you can perfectly fit four windows sized "proportion 0.25" on an output.
+        // The default preset widths are 1/3, 1/2 and 2/3 of the output.
+        proportion 0.33333
+        proportion 0.5
+        proportion 0.66667
+
+        // Fixed sets the width in logical pixels exactly.
+        // fixed 1920
+    }
+
+    // You can change the default width of the new windows.
+    default-column-width { proportion 0.5; }
+    // If you leave the brackets empty, the windows themselves will decide their initial width.
+    // default-column-width {}
+
+    // Set gaps around windows in logical pixels.
+    gaps 4
+
+    // Struts shrink the area occupied by windows, similarly to layer-shell panels.
+    // You can think of them as a kind of outer gaps. They are set in logical pixels.
+    // Left and right struts will cause the next window to the side to always be visible.
+    // Top and bottom struts will simply add outer gaps in addition to the area occupied by
+    // layer-shell panels and regular gaps.
+    struts {
+        // left 64
+        // right 64
+        // top 64
+        // bottom 64
+    }
+
+    // When to center a column when changing focus, options are:
+    // - "never", default behavior, focusing an off-screen column will keep at the left
+    //   or right edge of the screen.
+    // - "on-overflow", focusing a column will center it if it doesn't fit
+    //   together with the previously focused column.
+    // - "always", the focused column will always be centered.
+    center-focused-column "never"
+}
+
+// Add lines like this to spawn processes at startup.
+// Note that running niri as a session supports xdg-desktop-autostart,
+// which may be more convenient to use.
+// spawn-at-startup "alacritty" "-e" "fish"
+
+// You can override environment variables for processes spawned by niri.
+environment {
+    // Set a variable like this:
+    // QT_QPA_PLATFORM "wayland"
+
+    // Remove a variable by using null as the value:
+    // DISPLAY null
+}
+
+cursor {
+    // Change the theme and size of the cursor as well as set the
+    // `XCURSOR_THEME` and `XCURSOR_SIZE` env variables.
+    // xcursor-theme "default"
+    // xcursor-size 24
+}
+
+// Uncomment this line to ask the clients to omit their client-side decorations if possible.
+// If the client will specifically ask for CSD, the request will be honored.
+// Additionally, clients will be informed that they are tiled, removing some rounded corners.
+// prefer-no-csd
+
+// You can change the path where screenshots are saved.
+// A ~ at the front will be expanded to the home directory.
+// The path is formatted with strftime(3) to give you the screenshot date and time.
+screenshot-path "~/Pictures/Screenshots/Screenshot from %Y-%m-%d %H-%M-%S.png"
+
+// You can also set this to null to disable saving screenshots to disk.
+// screenshot-path null
+
+// Settings for the "Important Hotkeys" overlay.
+hotkey-overlay {
+    // Uncomment this line if you don't want to see the hotkey help at niri startup.
+    // skip-at-startup
+}
+
+// Animation settings.
+animations {
+    // Uncomment to turn off all animations.
+    // off
+
+    // Slow down all animations by this factor. Values below 1 speed them up instead.
+    // slowdown 3.0
+
+    // You can configure all individual animations.
+    // Available settings are the same for all of them.
+    // - off disables the animation.
+    //
+    // Niri supports two animation types: easing and spring.
+    // You can set properties for only ONE of them.
+    //
+    // Easing has the following settings:
+    // - duration-ms sets the duration of the animation in milliseconds.
+    // - curve sets the easing curve. Currently, available curves
+    //   are "ease-out-cubic" and "ease-out-expo".
+    //
+    // Spring animations work better with touchpad gestures, because they
+    // take into account the velocity of your fingers as you release the swipe.
+    // The parameters are less obvious and generally should be tuned
+    // with trial and error. Notably, you cannot directly set the duration.
+    // You can use this app to help visualize how the spring parameters
+    // change the animation: https://flathub.org/apps/app.drey.Elastic
+    //
+    // A spring animation is configured like this:
+    // - spring damping-ratio=1.0 stiffness=1000 epsilon=0.0001
+    //
+    // The damping ratio goes from 0.1 to 10.0 and has the following properties:
+    // - below 1.0: underdamped spring, will oscillate in the end.
+    // - above 1.0: overdamped spring, won't oscillate.
+    // - 1.0: critically damped spring, comes to rest in minimum possible time
+    //        without oscillations.
+    //
+    // However, even with damping ratio = 1.0 the spring animation may oscillate
+    // if "launched" with enough velocity from a touchpad swipe.
+    //
+    // Lower stiffness will result in a slower animation more prone to oscillation.
+    //
+    // Set epsilon to a lower value if the animation "jumps" in the end.
+    //
+    // The spring mass is hardcoded to 1.0 and cannot be changed. Instead, change
+    // stiffness proportionally. E.g. increasing mass by 2x is the same as
+    // decreasing stiffness by 2x.
+
+    // Animation when switching workspaces up and down,
+    // including after the touchpad gesture.
+    workspace-switch {
+        // off
+        // spring damping-ratio=1.0 stiffness=1000 epsilon=0.0001
+    }
+
+    // All horizontal camera view movement:
+    // - When a window off-screen is focused and the camera scrolls to it.
+    // - When a new window appears off-screen and the camera scrolls to it.
+    // - When a window resizes bigger and the camera scrolls to show it in full.
+    // - And so on.
+    horizontal-view-movement {
+        // off
+        // spring damping-ratio=1.0 stiffness=800 epsilon=0.0001
+    }
+
+    // Window opening animation. Note that this one has different defaults.
+    window-open {
+        // off
+        // duration-ms 150
+        // curve "ease-out-expo"
+
+        // Example for a slightly bouncy window opening:
+        // spring damping-ratio=0.8 stiffness=1000 epsilon=0.0001
+    }
+
+    // Config parse error and new default config creation notification
+    // open/close animation.
+    config-notification-open-close {
+        // off
+        // spring damping-ratio=0.6 stiffness=1000 epsilon=0.001
+    }
+}
+
+// Window rules let you adjust behavior for individual windows.
+// They are processed in order of appearance in this file.
+// (This example rule is commented out with a "/-" in front.)
+/-window-rule {
+    // Match directives control which windows this rule will apply to.
+    // You can match by app-id and by title.
+    // The window must match all properties of the match directive.
+    match app-id="org.myapp.MyApp" title="My Cool App"
+
+    // There can be multiple match directives. A window must match any one
+    // of the rule's match directives.
+    //
+    // If there are no match directives, any window will match the rule.
+    match title="Second App"
+
+    // You can also add exclude directives which have the same properties.
+    // If a window matches any exclude directive, it won't match this rule.
+    //
+    // Both app-id and title are regular expressions.
+    // Raw KDL strings are helpful here.
+    exclude app-id=r#"\.unwanted\."#
+
+    // Here are the properties that you can set on a window rule.
+    // You can override the default column width.
+    default-column-width { proportion 0.75; }
+
+    // You can set the output that this window will initially open on.
+    // If such an output does not exist, it will open on the currently
+    // focused output as usual.
+    open-on-output "eDP-1"
+
+    // Make this window open as a maximized column.
+    open-maximized true
+
+    // Make this window open fullscreen.
+    open-fullscreen true
+    // You can also set this to false to prevent a window from opening fullscreen.
+    // open-fullscreen false
+}
+
+// Here's a useful example. Work around WezTerm's initial configure bug
+// by setting an empty default-column-width.
+window-rule {
+    // This regular expression is intentionally made as specific as possible,
+    // since this is the default config, and we want no false positives.
+    // You can get away with just app-id="wezterm" if you want.
+    // The regular expression can match anywhere in the string.
+    match app-id=r#"^org\.wezfurlong\.wezterm$"#
+    default-column-width {}
+}
+
+binds {
+    // Keys consist of modifiers separated by + signs, followed by an XKB key name
+    // in the end. To find an XKB name for a particular key, you may use a program
+    // like wev.
+    //
+    // "Mod" is a special modifier equal to Super when running on a TTY, and to Alt
+    // when running as a winit window.
+    //
+    // Most actions that you can bind here can also be invoked programmatically with
+    // `niri msg action do-something`.
+
+    // Mod-Shift-/, which is usually the same as Mod-?,
+    // shows a list of important hotkeys.
+    Mod+Shift+Slash { show-hotkey-overlay; }
+
+    // Suggested binds for running programs: terminal, app launcher, screen locker.
+    Mod+Return { spawn "foot"; }
+    Mod+D { spawn "fuzzel"; }
+    Mod+Shift+L { spawn "swaylock"; }
+
+    // You can also use a shell:
+    // Mod+T { spawn "bash" "-c" "notify-send hello && exec alacritty"; }
+
+    // Example volume keys mappings for PipeWire & WirePlumber.
+    XF86AudioRaiseVolume { spawn "wpctl" "set-volume" "@DEFAULT_AUDIO_SINK@" "0.1+"; }
+    XF86AudioLowerVolume { spawn "wpctl" "set-volume" "@DEFAULT_AUDIO_SINK@" "0.1-"; }
+
+    Mod+Shift+Q { close-window; }
+
+    Mod+Left  { focus-column-left; }
+    Mod+Down  { focus-window-down; }
+    Mod+Up    { focus-window-up; }
+    Mod+Right { focus-column-right; }
+    Mod+H     { focus-column-left; }
+    Mod+J     { focus-window-down; }
+    Mod+K     { focus-window-up; }
+    Mod+L     { focus-column-right; }
+
+    Mod+Ctrl+Left  { move-column-left; }
+    Mod+Ctrl+Down  { move-window-down; }
+    Mod+Ctrl+Up    { move-window-up; }
+    Mod+Ctrl+Right { move-column-right; }
+    Mod+Ctrl+H     { move-column-left; }
+    Mod+Ctrl+J     { move-window-down; }
+    Mod+Ctrl+K     { move-window-up; }
+    Mod+Ctrl+L     { move-column-right; }
+
+    // Alternative commands that move across workspaces when reaching
+    // the first or last window in a column.
+    // Mod+J     { focus-window-or-workspace-down; }
+    // Mod+K     { focus-window-or-workspace-up; }
+    // Mod+Ctrl+J     { move-window-down-or-to-workspace-down; }
+    // Mod+Ctrl+K     { move-window-up-or-to-workspace-up; }
+
+    Mod+Home { focus-column-first; }
+    Mod+End  { focus-column-last; }
+    Mod+Ctrl+Home { move-column-to-first; }
+    Mod+Ctrl+End  { move-column-to-last; }
+
+    // Mod+Shift+Left  { focus-monitor-left; }
+    // Mod+Shift+Down  { focus-monitor-down; }
+    // Mod+Shift+Up    { focus-monitor-up; }
+    // Mod+Shift+Right { focus-monitor-right; }
+    // Mod+Shift+H     { focus-monitor-left; }
+    // Mod+Shift+J     { focus-monitor-down; }
+    // Mod+Shift+K     { focus-monitor-up; }
+    // Mod+Shift+L     { focus-monitor-right; }
+
+    Mod+Shift+Ctrl+Left  { move-column-to-monitor-left; }
+    Mod+Shift+Ctrl+Down  { move-column-to-monitor-down; }
+    Mod+Shift+Ctrl+Up    { move-column-to-monitor-up; }
+    Mod+Shift+Ctrl+Right { move-column-to-monitor-right; }
+    Mod+Shift+Ctrl+H     { move-column-to-monitor-left; }
+    Mod+Shift+Ctrl+J     { move-column-to-monitor-down; }
+    Mod+Shift+Ctrl+K     { move-column-to-monitor-up; }
+    Mod+Shift+Ctrl+L     { move-column-to-monitor-right; }
+
+    // Alternatively, there are commands to move just a single window:
+    // Mod+Shift+Ctrl+Left  { move-window-to-monitor-left; }
+    // ...
+
+    // And you can also move a whole workspace to another monitor:
+    // Mod+Shift+Ctrl+Left  { move-workspace-to-monitor-left; }
+    // ...
+
+    Mod+Page_Down      { focus-workspace-down; }
+    Mod+Page_Up        { focus-workspace-up; }
+    Mod+U              { focus-workspace-down; }
+    Mod+I              { focus-workspace-up; }
+    Mod+Ctrl+Page_Down { move-column-to-workspace-down; }
+    Mod+Ctrl+Page_Up   { move-column-to-workspace-up; }
+    Mod+Ctrl+U         { move-column-to-workspace-down; }
+    Mod+Ctrl+I         { move-column-to-workspace-up; }
+
+    // Alternatively, there are commands to move just a single window:
+    // Mod+Ctrl+Page_Down { move-window-to-workspace-down; }
+    // ...
+
+    Mod+Shift+Page_Down { move-workspace-down; }
+    Mod+Shift+Page_Up   { move-workspace-up; }
+    Mod+Shift+U         { move-workspace-down; }
+    Mod+Shift+I         { move-workspace-up; }
+
+    // You can refer to workspaces by index. However, keep in mind that
+    // niri is a dynamic workspace system, so these commands are kind of
+    // "best effort". Trying to refer to a workspace index bigger than
+    // the current workspace count will instead refer to the bottommost
+    // (empty) workspace.
+    //
+    // For example, with 2 workspaces + 1 empty, indices 3, 4, 5 and so on
+    // will all refer to the 3rd workspace.
+    Mod+1 { focus-workspace 1; }
+    Mod+2 { focus-workspace 2; }
+    Mod+3 { focus-workspace 3; }
+    Mod+4 { focus-workspace 4; }
+    Mod+5 { focus-workspace 5; }
+    Mod+6 { focus-workspace 6; }
+    Mod+7 { focus-workspace 7; }
+    Mod+8 { focus-workspace 8; }
+    Mod+9 { focus-workspace 9; }
+    Mod+Ctrl+1 { move-column-to-workspace 1; }
+    Mod+Ctrl+2 { move-column-to-workspace 2; }
+    Mod+Ctrl+3 { move-column-to-workspace 3; }
+    Mod+Ctrl+4 { move-column-to-workspace 4; }
+    Mod+Ctrl+5 { move-column-to-workspace 5; }
+    Mod+Ctrl+6 { move-column-to-workspace 6; }
+    Mod+Ctrl+7 { move-column-to-workspace 7; }
+    Mod+Ctrl+8 { move-column-to-workspace 8; }
+    Mod+Ctrl+9 { move-column-to-workspace 9; }
+
+    // Alternatively, there are commands to move just a single window:
+    // Mod+Ctrl+1 { move-window-to-workspace 1; }
+
+    Mod+Comma  { consume-window-into-column; }
+    Mod+Period { expel-window-from-column; }
+
+    // There are also commands that consume or expel a single window to the side.
+    // Mod+BracketLeft  { consume-or-expel-window-left; }
+    // Mod+BracketRight { consume-or-expel-window-right; }
+
+    Mod+R { switch-preset-column-width; }
+    Mod+F { maximize-column; }
+    Mod+Shift+F { fullscreen-window; }
+    Mod+C { center-column; }
+
+    // Finer width adjustments.
+    // This command can also:
+    // * set width in pixels: "1000"
+    // * adjust width in pixels: "-5" or "+5"
+    // * set width as a percentage of screen width: "25%"
+    // * adjust width as a percentage of screen width: "-10%" or "+10%"
+    // Pixel sizes use logical, or scaled, pixels. I.e. on an output with scale 2.0,
+    // set-column-width "100" will make the column occupy 200 physical screen pixels.
+    Mod+Minus { set-column-width "-10%"; }
+    Mod+Equal { set-column-width "+10%"; }
+
+    // Finer height adjustments when in column with other windows.
+    Mod+Shift+Minus { set-window-height "-10%"; }
+    Mod+Shift+Equal { set-window-height "+10%"; }
+
+    // Actions to switch layouts.
+    // Note: if you uncomment these, make sure you do NOT have
+    // a matching layout switch hotkey configured in xkb options above.
+    // Having both at once on the same hotkey will break the switching,
+    // since it will switch twice upon pressing the hotkey (once by xkb, once by niri).
+    // Mod+Space       { switch-layout "next"; }
+    // Mod+Shift+Space { switch-layout "prev"; }
+
+    Print { screenshot; }
+    Ctrl+Print { screenshot-screen; }
+    Alt+Print { screenshot-window; }
+
+    // The quit action will show a confirmation dialog to avoid accidental exits.
+    // If you want to skip the confirmation dialog, set the flag like so:
+    // Mod+Shift+E { quit skip-confirmation=true; }
+    Mod+Shift+E { quit; }
+
+    Mod+Shift+P { power-off-monitors; }
+
+    // This debug bind will tint all surfaces green, unless they are being
+    // directly scanned out. It's therefore useful to check if direct scanout
+    // is working.
+    // Mod+Shift+Ctrl+T { toggle-debug-tint; }
+}
+
+// Settings for debugging. Not meant for normal use.
+// These can change or stop working at any point with little notice.
+debug {
+    // Make niri take over its DBus services even if it's not running as a session.
+    // Useful for testing screen recording changes without having to relogin.
+    // The main niri instance will *not* currently take back the services; so you will
+    // need to relogin in the end.
+    // dbus-interfaces-in-non-session-instances
+
+    // Wait until every frame is done rendering before handing it over to DRM.
+    // wait-for-frame-completion-before-queueing
+
+    // Enable direct scanout into overlay planes.
+    // May cause frame drops during some animations on some hardware.
+    // enable-overlay-planes
+
+    // Disable the use of the cursor plane.
+    // The cursor will be rendered together with the rest of the frame.
+    // disable-cursor-plane
+
+    // Override the DRM device that niri will use for all rendering.
+    // render-drm-device "/dev/dri/renderD129"
+
+    // Enable the color-transformations capability of the Smithay renderer.
+    // May cause a slight decrease in rendering performance.
+    // enable-color-transformations-capability
+
+    // Emulate zero (unknown) presentation time returned from DRM.
+    // This is a thing on NVIDIA proprietary drivers, so this flag can be
+    // used to test that we don't break too hard on those systems.
+    // emulate-zero-presentation-time
+}

A bin/rose/xdg-open

@@ -0,0 +1,12 @@ 
+#!/bin/sh
+case "${1%%:*}" in
+    http|https)
+        exec firefox "$1"
+        ;;
+    *.pdf)
+        exec zathura "$1"
+        ;;
+    *)
+        exec /usr/bin/xdg-open "$@"
+        ;;
+esac